4-6 Cutter Installation Method 3 (Diamond Scraper)
69
Chapter 4 Engraving
3.
Make the settings for spindle speed and Z-axis control.
➊
Press several times to display the screen shown at left.
Use
and to select [OTHERS].
Press
.
➋
Use to select “OFF.”
Press
to confirm.
➌
Press .
Use
to select “ON.”
The machine automatically determines the Z-axis origin during cutting accord-
ing to the height of the workpiece.
Press to confirm.
The message shown at left is displayed for three seconds, and then the original
screen returns.
➍
Press .
Use
and to select the value.
This makes the setting for the distance the cutter rises from the Z-axis origin
point during cutting (the cut-out amount). When making this setting, take into
account the shape of the workpiece and the time required for movement.
Press to confirm.
➎
Press several times to return to the main screen.
The Z-axis coordinate display changes to “AUTO” and the spindle-speed dis-
play changes to “S OFF.”
4.
Install the diamond scraper and determine the amount of extension.
➊
Insert the diamond scraper into the cut-
ter holder.
Diamond scraper
Cutter holder