Filter
Top Products
47
Chapter 3 Basic Operation
3-5 Spindle Operation
Starting and Stopping Spindle Rotation
This manually starts and stops rotation of the spindle. You perform the operation using the handy panel.
☞ P. 35, "Spindle Run-in (Warm-up)"
Procedure
➊
Close the front cover.
➋
At the main screen, press and hold for one second
or longer.
A beep is heard, and the spindle starts to turn.
➌
Press .
The spindle stops turning, a beep is heard.
This operation cannot be performed in the following situations.
➢ When the machine is performing some operation
➢ When the front cover is open (in which case the screen shown in the figure below is displayed)
☞ P. 103, “Responding to a Message”
Spindle rotation speed