Roland EGX-350 Engraver User Manual


 
To Ensure Safe Use
6
This machine weighs 34 kg (75 lb.)
CAUTION
Unloading and emplacement are opera-
tions that must be performed by 2 per-
sons or more.
Tasks that require undue effort when performed
by a small number of persons may result in physi-
cal injury. Also, if dropped, such items may cause
injury.
CAUTION
Install in a location that is level and stable.
Installation in an unsuitable location may cause
an accident, including a fall or tipover.
WARNING
Never attempt to cut magnesium or any
other such flammable material.
Fire may occur during cutting.
Keep open flame away from the work area.
Cutting waste may ignite. Powdered material is
extremely flammable, and even metal material
may catch fire.
When using a vacuum cleaner to take up
cutting waste, exercise caution to prevent
fire or dust explosion.
Taking up fine cuttings using an ordinary vacuum
cleaner may cause danger of fire or explosion.
Check with the manufacturer of the vacuum
cleaner. When the safety of use cannot be de-
termined, clean using a brush or the like, with-
out using the vacuum cleaner.
CAUTION
Wear dust goggles and a mask. Wash away
any cutting waste remaining on the hands.
Accidentally swallowing or inhaling cutting waste
may be hazardous to the health.
The cutting waste or workpiece may catch fire or pose a health hazard.