Filter
Top Products
18
Important Notes on Handling and Use
This machine is a precision device. To ensure the full performance of this machine, be sure to observe the
following important points. Failure to observe these may not only result in loss of performance, but may also
cause malfunction or breakdown.
This machine is a precision device.
➢Handle carefully, and never subject the machine to impact or excessive force.
➢Use within the range of specifications.
➢Diligently keep clean of cutting waste.
➢Never needlessly touch anywhere inside the machine except for locations specified in this manual.
Install in a suitable location.
➢Install in a location that meets the specified conditions for temperature, relative humidity, and the like.
➢Install in a quiet, stable location offering good operating conditions.
➢Never install in out of doors.
This machine becomes hot.
➢Never cover the ventilation holes with cloth, tape, or anything else.
➢Install in a well-ventilated location.
About Cutters
➢Use a cutter that is suitable for the workpiece and the cutting method.
➢The tip of the cutter is breakable. Handle with care, being careful not to drop it.