Filter
Top Products
4-4 Cutter Installation Method 1 (With Nose Unit)
58
Chapter 4 Engraving
2.
Set the lock lever.
Set the lock lever at the or posi-
tion.
For detailed information about the setting
position for the lock lever, refer to the page
indicated below.
☞ P. 82, “The Position of the Lock Lever”
3.
Make the settings for spindle speed and Z-axis control.
➊
Press several times to display the screen shown at left.
Use
and to select [OTHERS].
Press
.
➋
Press to select “ON.”
Press
to confirm.
➌
Press .
Use
to select “ON.”
The machine automatically determines the Z-axis origin during cutting accord-
ing to the height of the workpiece.
Press to confirm.
The message shown at left is displayed for three seconds, and then the original
screen returns.
➍
Press .
Use
and to select the value.
This makes the setting for the distance the cutter rises from the Z-axis origin
point during cutting (the cut-out amount). When making this setting, take into
account the shape of the workpiece and the time required for movement.
Press to confirm.
➎
Press several times to return to the main screen.
The Z-axis coordinate display changes to “AUTO.”
Lock lever
Press down to lower
slightly.