Filter
Top Products
2-2 Installation
29
Chapter 2 Installation and Setup
Unpacking
Retaining materials are attached to protect the machine from vibration during shipment. Remove these after emplace-
ment.
➢ Remove all Retaining materials. Any that remain may cause faulty operation or breakdown when the power is
switched on.
➢ The Retaining materials are required when moving the machine to a different location. Store them carefully so that
they do not get misplaced.
WARNING
Carry out these operations before you connect the power cord.
Inadvertent powerup may result in pinched hands or other injury.
Procedure
➊
Make sure the power cord is not connected.
➋
Remove retainer A.
➌
Slowly move the spindle head in the di-
rection of the arrow.
Take care not to subject it to strong impact.
➍
Remove retainers B and C.
Spindle head
Retainer A
Retainer B Retainer C
Hexagonal wrench
Hexagonal wrench