In-Sight
®
1700 Series Wafer Reader Appendix B: Updating the Reader
103
4 Locate the .HTM, .JAR, .JOB, and .SET files in the directory into which you
previously installed the In-Sight PC Host (C:\InSight2\1700 by default). Copy and
paste (or drag and drop) these files to the browser window, then refresh the view; the
selected files have been copied to 1700 flash memory and now appear in the
browser window, as shown in Figure B-0-3.
Figure B-0-3: Installed 1700 files
To FTP files from an FTP prompt (in Windows):
1 Open a DOS prompt and change the directory to C:\InSight2\1700. Open an FTP
session and login to the target reader by typing ftp followed by the IP Address (for
example, ftp 192.168.0.1), as shown in Figure B-0-4.
NOTE To connect to a 1700 using FTP from a non-Windows host, first copy the required files from
the C:\InSight2 directory on the PC to the FTP server, then open the FTP session.
Figure B-0-4: FTP command prompt in Windows
