A SERVICE OF

logo

Appendix C: Configuring Microsoft Windows Network Settings In-Sight
®
1700 Series Wafer Reader
106
6 If TCP/IP is not on the list of installed protocols, click Add to open the Select Network
Protocol dialog (Figure C-0-2).
Figure C-0-2: Select Network Protocol dialog
7 Select TCP/IP Protocol and click OK. Windows NT will install the protocol and return
to the Network dialog.
8 Configure the IP Address and Subnet Mask.
9 Highlight TCP/IP Protocol in the Protocols tab and click Properties to open the
Microsoft TCP/IP Properties dialog (Figure C-0-3):
Figure C-0-3: Microsoft TCP/IP Properties Dialog