A SERVICE OF

logo

Open as PDF
next previous
In-Sight
®
1700 Series Wafer Reader Appendix C: Configuring Microsoft Windows Network Settings
107
10 Click the Specify an IP address radio button. The IP Address and Subnet Mask fields,
which are grayed-out when DHCP is enabled, become active.
11 Enter an appropriate Subnet Mask. The Subnet Mask defines which part of the 1700
reader’s IP Address refers to the network and which part refers to the host. The
network part of the IP address is the same for all hosts on the same subnet, and the
remainder is unique to each host. The default Subnet Mask setting of 255.255.255.0
is usually appropriate.
12 Click OK twice, then restart Windows if prompted to do so.