A SERVICE OF

logo

In-Sight
®
1700 Series Wafer Reader Section 3: Configuring a Wafer ID Application
21
3.3 Getting an Image
Before Config settings can be defined for reading wafer marks, a reasonable image of the
mark is needed.
NOTE For specific information on setting the working distance and adjusting the focus of a 1701 reader,
see Appendix E: 1701 Wafer Reader Installation Options.
1 In the Run tab, disable the Online checkbox.
2 Click the Setup tab.
3 Click the Live button. Position the wafer mark horizontally in the field of view (FOV),
making sure that the entire mark is visible in the image.
Figure 3-1: Position Mark using Live mode