Section 7: Native Mode Commands In-Sight
®
1700 Series Wafer Reader
68
SETTING DESCRIPTION
<NumFailed>
The number of failed reads for a Config.
0 – 99,999
<NumPassed>
The number of passed reads for a Config.
0 – 99,999
<NumTuneFailed>
The number of failed reads during a tune for a Config.
0 – 99,999
<NumTunePassed>
The number of passed reads during a tune for a Config.
0 – 99,999
<Order>
The order in which enabled Configs will be tried until a successful read can be obtained.
0 = Last Best (default)
1 = In Order (0-9)
<Orientation>
The index of the Img Orientation setting for the specified Config.
0 = Normal
1 = Mirrored horizontally
2 = Flipped vertically
3 = Rotated 180 degrees
<Passed>
The pass/fail status of the specified Config for the most recent read.
0 – 99,999
<ReadLog>
A record of the most recent read that passed.
0-9
<Region>
The region where the wafer mark is expected to appear in the field of view.
Row and High: 4 – 480
Col and Wide: 4 – 640
<Retry>
The tuning behavior.
0 = Disable (default)
1 = Enable
2 = Enable & Apply
<Row>
The row coordinate of the input region or the individual character in a string.
4 – 480
<Score>
The average raw response scores for all Configs that passed.
0 – 400
<Size>
Specifies whether the mark size will be modified during tuning.
0 = Disable Size tuning
1 = Enable Size tuning
<String>
The character results from the read.
alphanumerics (A-Z, 0-9), dashes (-), dots (.), and spaces
<StringLen>
The number of characters in the result string.
0 – 32
<Theta>
The orientation of the fixture.
0 – 359
<Timeout>
The total amount of time (in seconds) to allow for a read, including retries and tuning of
enabled Configs.
0 – 60 (default = 30)
<TryLog>
The Retry status of the Config during the last read.
0 – 99,999
<TuneLog>
The Retry and Tune status of the Config during the last read.
0 – 99,999
<Value>
The raw response score of the specified character in a read string.
0 – 99,999
<WafID>
References the
data structure in spreadsheet cell A4.
<Wide> (CharSize)
The width of a 2D symbol or the average width of the characters in a string, as measured
in pixels.
8 – 80 (default = 15)
<Wide> (Region)
The width of the region (along the X-axis) where the wafer mark is expected to appear in
the field of view.
4 – 640 (default = 500)
