Filter
Top Products
Chapter 5 297
One-Button Measurement Functions
MEASURE (Spectrum Analysis Mode)
One-Button Measurement Functions
5.1 MEASURE (Spectrum Analysis Mode)
In the Spectrum Analysis mode (see the Mode key), this key displays a menu that lets you
to make transmitter power measurements such as adjacent channel power, occupied
bandwidth, and harmonic distortion measurements. If other modes are available and have
been selected, the measurements for that particular mode will be displayed. Some common
settings can be made for these measurements using the function under the
Mode Setup key.
For example, you may select one of several radio standards available by pressing Mode
Setup
, Radio Std.
NOTE The measurements described in the “One-Button Measurement Functions”
chapter are available in SA mode (see
Mode key). Other measurements are
available in other modes if an optional personality is installed.
Dependencies/
Couplings: When a measurement is activated, Signal Track, Video Averaging,
Segmented Sweep, Band Power and Marker Noise will be turned off.
Remote Command Info:
5.1.1 Command Interactions: MEASure, CONFigure, FETCh, INITiate
and READ
Figure 1 Measurement Group of Commands