Filter
Top Products
Chapter 5 377
One-Button Measurement Functions
Trace/View (Burst Power)
One-Button Measurement Functions
5.9 Trace/View (Burst Power)
If Burst Power has been selected in the Measure menu of the Spectrum Analysis mode, this
key displays the appropriate
Trace/View menu for the burst power measurement.
Displays menu keys that enable you to set how trace information is stored and displayed.
Key Path: Front-panel key
Remote Command:
There is no remote command for this key.
5.9.1 RF Envelope
Press RF Envelope to view the measurement results as shown in the following figure. The
results are updated after each sweep.
Key Path:
Trace/View
History: Added with firmware revision A.02.00