Agilent Technologies E4440-90189 Saw User Manual


 
498 Chapter5
One-Button Measurement Functions
Meas Setup (Spurious Emissions)
One-Button Measurement Functions
Remote Command:
[:SENSe]:SPURious:TYPE EXAMine|FULL
[:SENSe]:SPURious:TYPE?
Remote Command Notes n/a
Example: SPUR:TYPE FULL
5.27.5 Spur
Enables you to view any spurs that have been found. The measurement sets the analyzer
to the range in which the currently selected spur was found. The range settings changes
only if the selected spur is in the range that is different from the current range settings. A
marker identifies the currently selected spur on the trace.
NOTE This key is enabled only when Meas Type is set to Examine, and only upon
completion of a measurement.
Key Path:
Meas Setup
Saved State: No values are saved to state.
Factory Preset: 1
Knob Increment: 1
Step Key
Increment: 1
Range: 1 to 100
Remote Command:
[:SENSe]:SPURious:SPUR <integer>
[:SENSe]:SPURious:SPUR?
5.27.6 Ref Level
Pressing Ref Level sets the reference level of the analyzer.
Key Path:
Meas Setup
Saved State: Ref Level state is saved to instrument state. Ref Level value is
recalculated for each active range the value is not stored in instrument
state.
Factory Preset: 0.00 dBm
Knob Increment: 1
Step Key