Filter
Top Products
Chapter 2 57
Instrument Functions: A - L
AMPLITUDE / Y Scale
Instrument Functions: A - L
This sets the top line to 100 mV and the bottom line to 0 V, so each vertical
division represents 10 mV. Thus, if a point on trace 1 is on the fifth
graticule line from the top, it represents 50 mV and will read out remotely
as 50.
Example: UNIT:POW dBmV
UNIT:POW?
2.0.7.1 dBm
Sets the amplitude units to dBm.
Key Path:
AMPLITUDE / Y Scale, More, YAxisUnits
Remote Command:
See “Y Axis Units” on page 56.
Example: UNIT:POW DBM
2.0.7.2 dBmV
Sets the amplitude units to dBmV.
Key Path:
AMPLITUDE / Y Scale, More, YAxisUnits
Remote Command:
See “Y Axis Units” on page 56.
Example: UNIT:POW DBMV
2.0.7.3 dBµV
Sets the amplitude units to dBµV.
Key Path:
AMPLITUDE / Y Scale, More, YAxisUnits
Remote Command:
See “Y Axis Units” on page 56.
Example: UNIT:POW DBUV
2.0.7.4 Volts
Sets the amplitude units to volts.
Key Path:
AMPLITUDE / Y Scale, More, YAxisUnits