Filter
Top Products
Chapter 5 463
One-Button Measurement Functions
Meas Setup (Spectrum Emissions Mask—SEM)
One-Button Measurement Functions
Table 5-3 Offsets & Limits Defaulted for W-CDMA (3GPP) Mobile Station
Measurements
a
a. Abs Stop issettoCoupleandFail Mask is set to Abs AND Rel.
Offset Start
Freq
(MHz)
Stop
Freq
(MHz)
ResBW
(kHz)
Abs
Start
(dBm)
Abs
Stop
(dBm)
Rel
Start
(dBc)
Rel
Stop
(dBc)
Rel
Couple
Meas
BW
A, On 2.515 3.485 30.00 −71.07 −71.07 −35.23 −49.78 Man 1
B, On 4.000 7.500 1000.0 −55.84 −55.84 −35.50 −39.00 Man 1
C, On 7.500 8.500 1000.0 −55.84 −55.84 −39.00 −49.00 Man 1
D, On 8.500 12.000 1000.0 −55.84 −55.84 −49.00 −49.00 Couple 1
E, Off 12.500 15.000 1000.0 −55.84 −55.84 −49.00 −49.00 Couple 1
Table 5-4 Offsets & Limits Defaulted for 802.11a and HiperLAN/2 Radio Standards
a
a. Sweep Time is set to 100 mseconds, Res BW is set to 100 kHz, and Fail Mask is
set to Rel.
Offset Start
Freq
(MHz)
Stop
Freq
(MHz)
Abs
Start
(dBm)
Abs
Stop
(dBm)
Abs
Couple
Rel
Start
(dBc)
Rel
Stop
(dBc)
Rel
Couple
Meas
BW
A, On 9.00 11.00 16.00 −4.00 Man 0.00 −20.00 Man 1
B, On 11.00 20.00 −4.00 −12.00 Man −20.00 −28.00 Man 1
C, On 20.00 30.00 −12.00 −24.00 Man −28.00 −40.00 Man 1
D, On 30.00 50.00 −24.00 −24.00 Couple −40.00 −40.00 Couple 1
E, Off 50.00 100.00 −24.00 −24.00 Couple −40.00 −40.00 Couple 1
Table 5-5 Offsets & Limits Defaulted for 802.11b Radio Standard
a
a. Sweep Time is set to 100 mseconds, Res BW is set to 100 kHz, Fail Mask
is set to Rel, and Abs Stop and Rel Stop are both set to Couple
Offset Start
Freq
(MHz)
Stop
Freq
(MHz)
Abs
Start
(dBm)
Abs
Stop
(dBm)
Rel
Start
(dBc)
Rel
Stop
(dBc)
Meas
BW
A, On 11.00 22.00 −10.00 −10.00 −30.00 −30.00 1
B, On 22.00 50.00 −30.00 −30.00 −50.00 −50.00 1
C, Off 50.00 70.00 −30.00 −30.00 −50.00 −50.00 1
D, Off 70.00 90.00 −30.00 −30.00 −50.00 −50.00 1
E, Off 90.00 100.00 −30.00 −30.00 −50.00 −50.00 1