Cisco Systems 0L-11350-01 Welder User Manual


 
6-14
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-11350-01
Chapter 6 Configuring Radio Settings
Configuring Radio Channel Settings
Table 6-3 shows the available channels and frequencies for the IEEE 802.11b 2.4-GHz radio.
Table 6-3 Channels and Frequencies for IEEE 802.11b 2.4 GHz Radio
Table 6-4 shows the available frequencies for the 802.11g 2.4 GHz radio.
Step 3
channel
frequency | least-congested
Set the default channel for the wireless device radio. Table 6-3
through Table 6-6 show the available channels and frequencies for
all radios. Table 6-3 and Table 6-4 show the channels and
frequencies. To search for the least-congested channel on startup,
enter least-congested.
Note The channel command is disabled for 5-GHz radios that
comply with European Union regulations on dynamic
frequency selection (DFS). See the “Dynamic Frequency
Selection” section on page 6-17 for more information.
Step 4
end Return to privileged EXEC mode.
Step 5
copy running-config
startup-config
(Optional) Save your entries in the configuration file.
Command Purpose
Channel
Identifier
Center
Frequency (MHz)
Regulatory Domains
Americas
(A)
China
(C)
EMEA
(E)
Israel
(I)
Japan
(J)
1 2412 X X X X
2 2417 X X X X
3 2422 X X X X
4 2427 X X X X
5 2432 XXXXX
6 2437 XXXXX
7 2442 XXXXX
8 2447 XXXXX
9 2452 X X X X
10 2457 X X X X
11 2462 X X X X
12 2467 X X
13 2472 X X
142484 ––––X