Filter
Top Products
2-7
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-11350-01
Chapter 2 Using the Web-Browser Interface
Enabling HTTPS for Secure Browsing
Figure 2-3 Services – DNS Page
Step 5
Select Enable for Domain Name System.
Step 6 In the Domain Name field, enter your company’s domain name. At Cisco Systems, for example, the
domain name is cisco.com.
Step 7 Enter at least one IP address for your DNS server in the Name Server IP Addresses entry fields.
Step 8 Click Apply. The access point’s FQDN is a combination of the system name and the domain name. For
example, if your system name is ap1100 and your domain name is company.com, the FQDN is
ap1100.company.com.
Step 9 Enter the FQDN on your DNS server.
Tip If you do not have a DNS server, you can register the access point’s FQDN with a dynamic DNS service.
Search the Internet for dynamic DNS to find a fee-based DNS service.