Filter
Top Products
C-25
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-11350-01
Appendix C Error and Event Messages
Cisco Discovery Protocol Messages
Cisco Discovery Protocol Messages
Error Message CDP_PD-2-POWER_LOW: %s - %s %s (%e)
Explanation
The system is not supplied with sufficient power.
Error Message Reconfigure or replace the source of inline power.
External Radius Server Error Messages
Error Message RADIUS:response-authenticator decrypt fail, paklen 32
Explanation
This error message means that there is a mismatch in the RADIUS shared key between
the RADIUS server and the access point.
Recommended Action Make sure that the shared key used on the RADIUS server and the access point
are the same.