Lincoln Electric SVM153-A Welding System User Manual


 
TROUBLESHOOTING & REPAIR
F-17 F-17
COMMANDER 500
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
FRONT
CONTROL
PANEL
SCREWS
SCREW
FIGURE F.2 FRONT PANEL/ROOF DETAILS
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE (CONTINUED)
5. Using the 3/8" wrench, remove the four
screws from the top front of the roof assem-
bly and the two screws from the sides of the
control box. Carefully lower the front con-
trol panel. See Figure F.2.
6. sWith the 9/16" wrench, remove the
exhaust pipe rain cap.
7. Remove the fuel tank cap, gasket, and the
lift bail cover seal.
8. With the help of an assistant, carefully
remove the roof. The door assembly
remains attached to the roof. Replace the
fuel cap.
9. With 3/8" wrench, remove the left rear panel
and the right and left front panels. See
Figure F.1.