NETGEAR FVS318 Router User Manual


 
Reference Manual for the Model FVS318 Cable/DSL ProSafe VPN Firewall
Setting Up the Hardware 2-3
The Firewall’s Front Panel
The front panel of the Model FVS318 Cable/DSL ProSafe VPN Firewall (Figure 2-1) contains
status LEDs.
Figure 2-1. FVS318 Front Panel
You can use some of the LEDs to verify connections. Table 2-1 lists and describes each LED on
the front panel of the firewall. These LEDs are green when lit, except for the TEST LED, which is
amber.
Table 2-1. LED Descriptions
Label Activity Description
POWER On Power is supplied to the firewall.
TEST On
Off
The system is initializing.
The system is ready and running.
INTERNET
LINK On The Internet port has detected a link with an attached device.
ACT (Activity) Blinking Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps) On
Off
The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Local port has detected a link with an attached device.
Data is being transmitted or received by the Local port.