Open as PDF
Reference Manual for the Model FVS318 Cable/DSL ProSafe VPN Firewall
Click on the “Show VPN Log” “Show VPN Status” buttons to display VPN connection
information, as described in Chapter 6, “Virtual Private Networking.”
The Attached Devices menu contains a table of all IP devices that the firewall has discovered on
the local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown in Figure 7-3
Figure 7-3. Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the firewall is rebooted, the table data is lost until the firewall
rediscovers the devices. To force the firewall to look for attached devices, click the Refresh button.
Changing the Administration Password
You can use the Set Password menu to change the firewall administrator's password for accessing
the Settings pages. (Note that this is NOT your ISP account password).
The default password for the firewall’s Web Configuration Manager is password. NETGEAR
recommends that you change this password to a more secure password. The ideal password
should contain no dictionary words from any language, and should be a mixture of letters (both
upper and lower case), numbers, and symbols. Your password can be up to 30 characters.