NETGEAR FVS318 Router User Manual


 
Reference Manual for the Model FVS318 Cable/DSL ProSafe VPN Firewall
7-2 Maintenance
This screen shows the following parameters:
Table 7-1. Menu 3.2 - System Status Fields
Field Description
System Name This field displays the Host Name assigned to the firewall in the Basic
Settings menu.
Firmware Version This field displays the firewall firmware version.
WAN Port These parameters apply to the Internet (WAN) port of the firewall.
IP Address This field displays the IP address being used by the Internet (WAN) port
of the firewall. If no address is shown, the firewall cannot connect to the
Internet.
IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the firewall.
DHCP If set to None, the firewall is configured to use a fixed IP address on the
WAN.
If set to Client, the firewall is configured to obtain an IP address
dynamically from the ISP.
LAN Port These parameters apply to the Local (WAN) port of the firewall.
IP Address This field displays the IP address being used by the Local (LAN) port of
the firewall. The default is 192.168.0.1
IP Subnet Mask This field displays the IP Subnet Mask being used by the Local (LAN)
port of the firewall. The default is 255.255.255.0
DHCP If set to None, the firewall will not assign IP addresses to local PCs on
the LAN.
If set to Server, the firewall is configured to assign IP addresses to local
PCs on the LAN.