Filter
Top Products
84 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001
See Also
password, setdate, setupdomain, showdate, showdomain, showplatform, and
the section “Setting Up the Platform” in the “System Power On and Setup” chapter
of the Sun Fire 6800/4810/4800/3800 Systems Platform Administration Manual. This
chapter describes a step-by-step procedure on setting up the platform using
setupplatform.
Example
min
All System Controller board components are tested using few
locations with few test patterns.
max
All System Controller board components are tested with all
tests and test patterns.
Configure platform for single or
dual partition mode
The two options are single or dual. The default is single. For
a description of single and dual partition mode, refer to the
“Overview” chapter in the Sun Fire 6800/4810/4800/3800
Systems Platform Administration Manual.
CODE EXAMPLE 3-47 setupplatform Output
schostname:SC> setupplatform
Network Configuration
---------------------
Use DHCP or static network settings? [DHCP]:
Network settings? [static]:
Hostname []:
IP Address []:
Netmask []:
Gateway []:
DNS Domain []:
Primary DNS Server []:
Secondary DNS Server []:
Loghosts
--------
Loghost [ ]:
Log Facility [local0]:
TABLE 3-11 setupplatform Parameter Values (Continued)
Parameter Description