Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 23
console
Connects to a domain from the platform.
Scope
platform shell
Syntax
console [-d] domainID
console -h
Options/Parameters
-d domainID is the domain to connect to and is a, b, c,ord. The -d parameter is
optional and does not need to precede the domainID.
-h displays help for this command.
Description
Connect to a domain. You use the console command to navigate from the platform
to a domain. If a password was created for connecting to this domain, you must
enter the password.
If the domain is active (the domain is running the Solaris operating environment,
OpenBoot PROM, or POST), you are connected to the domain console. Otherwise,
you are connected to the domain shell. To obtain the domain shell from the domain
console, see the chapter “System Controller Navigation Procedures” in the Sun Fire
6800/4810/4800/3800 Systems Platform Administration Manual.
See Also
disconnect