Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 109
■ sc shows the system controller configuration.
■ snmp shows snmp information for the platform.
■ status shows domain status for all domains.
-v is verbose mode.
Description
This command displays all configuration variables for this platform, including:
■ Network attributes of the platform
■ ACLs for each domain
■ Domain status
■ SNMP status
■ Loghosts
■ Partition configuration
■ Other values that are used but are not configurable such as the MAC address,
host ID, and system serial number
See Also
setupplatform, showdate
Example
CODE EXAMPLE 3-61 showplatform Output for a Sun Fire 6800 System
schostname:SC> showplatform
Domain Solaris Nodename Domain Status Keyswitch
------ ---------------- ------------- ---------
A - Powered Off off
B - Powered Off standby
C - Powered Off off
D - Powered Off off
The system controller is configured to be on a network.
Network settings: DHCP
Hostname: schostname
IP Address: xxx.xxx.xxx.xx
Netmask: xxx.xxx.xxx.x
Gateway: xxx.xxx.xxx.xxx