Filter
Top Products
92 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001
Definitions of the headings in CODE EXAMPLE 3-50 and CODE EXAMPLE 3-51 follow:
■ Component is the name of the board and its components.
■ Status is the status of the board or component.
■ Pending means that the component will change to the indicated status
(enabled or disabled) at the next reboot.
■ POST is the status of POST (passed or failed).
■ Description is a description of the board or component.
CODE EXAMPLE 3-51 shows sample output for the showcomponent ib6 command.
The abbreviations for the Component field are:
■ Nx Node name
■ IBx I/O assembly, where x is6–9
■ Px Port, where x is0–1
■ Bx Bus, where x is0–1
■ Cx Card in the I/O assembly, where x is0–7.
/NO/SB4/P3/B1/L1 enabled - pass 256M DRAM
/NO/SB4/P3/B1/L3 enabled - pass 256M DRAM
CODE EXAMPLE 3-51 showcomponent ib6 Sample Output
schostname:SC> showcomponent ib6
Component Status Pending POST Description
--------- ------- ------- ---- -----------
/N0/IB6/P0 enabled - pass IO controller 0
/N0/IB6/P1 enabled - pass IO controller 1
/N0/IB6/P0/B1 enabled - untest 66/33MHz PCI Bus
/N0/IB6/P0/B0 enabled - untest 33MHz PCI Bus
/N0/IB6/P0/B1/C0 enabled - untest 33MHz 5V Short PCI card
/N0/IB6/P0/B1/C1 enabled - untest 33MHz 5V Short PCI card
/N0/IB6/P0/B1/C2 enabled - untest 33MHz 5V Long/Short PCI card
/N0/IB6/P0/B1/C3 enabled - untest 33MHz 5V Long/Short PCI card
CODE EXAMPLE 3-50 showcomponent sb4 Sample Output (Continued)