Sun Microsystems 6800/4810/4800/3800 Welding System User Manual


 
Chapter 3 System Controller Alphabetical Command Reference 25
deleteboard
Unassigns a board from the domain where it is currently assigned.
Scope
platform shell, domain shell
Syntax for the Platform Shell and the Domain Shell
deleteboard system_board_name [system_board_name ...]
deleteboard [-h]
Options/Parameters
-h displays help for this command.
system_board_name is the board to be deleted. Values are sb0 to sb5 (CPU/Memory
board) and ib6 to ib9 (I/O assembly).
Description
Unassigns a board from the domain where it is currently assigned. When you use
this command from your current domain, you can only unassign boards that are
assigned to the current domain. The CPU/Memory board or the I/O assembly board
status must be in the Assigned state and the board must not be part of an active
domain. To display the board states, use the showboards command. For more
information on board states, see “Board States for CPU/Memory Boards and I/O
Assemblies” on page 6. The board does not have to be in the Access Control List
(ACL) to be unassigned from the domain.
To unassign a board from a domain, you must halt the Solaris operating
environment in the domain. For an overview of steps to perform, see the section
“Assigning and Unassigning Boards” in the “Maintenance” chapter of the Sun Fire
6800/4810/4800/3800 Systems Platform Administration Manual.
If a board is not present, the command unassigns ownership of the slot from the
specified domain.