Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 59
restoreconfig
Restores the platform and domain configurations from a server.
Scope
platform shell
Syntax
restoreconfig [-y|-n] -f url
restoreconfig -h
Options/Parameters
-h displays help for this command.
-y does not prompt for confirmation.
-n does not execute this command if confirmation is required.
-f specifies a URL, which must use the ftp protocol.
url is the directory containing the data files. The URL must point to a directory
and not a file. Examples are:
ftp://userid:password@hostname/path
ftp://hostname/path
Note – The hostname you enter can be the host name or the host name with a fully
qualified domain name, such as schostname or schostname.eng.sun.com.Youcannot
use a partial domain name.
Description
Restores the platform and domain configurations from a server if a system controller
board has failed and has been replaced. This is based on the two data files created by
the dumpconfig command, schostanme.nvci and schostname.tod, at the specified
URL, which must point to a directory and use the ftp protocol. This command
prompts you for a new platform password.