Filter
Top Products
62 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001
resume
Exits the domain shell and resumes access to the domain console.
Scope
domain shell
Syntax
resume [-h]
Options/Parameters
-h displays help for this command.
Description
Exits the domain shell and resumes access to the domain console. This command
requires an active domain. If the domain is not active, there is no domain console
and there is nothing to resume. When you connect to the domain console, there may
not be any output displayed. If either the OpenBoot PROM or the Solaris operating
environment is running in the domain, press the Return key to get the prompt.
Otherwise, POST output is displayed (may be a delay in displaying POST output).
Other system controller commands that also resume the domain console are listed in
the following section.
See Also
break, reset, setkeyswitch