Filter
Top Products
88 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001
TABLE 3-12 Output Header Definitions for the showboards and the showboards -v
Command
Header Description
Slot Slot designator. The Nx in the slot descriptor is the node number.
Pwr Indicates if the power status of the device is off or on.
Component type Component description.
State Describes board state. Possible values are: Active, Assigned,
Available and – (dash). The - board state means that the board state
does not apply to this slot. For more information on board states,
see “Board States for CPU/Memory Boards and I/O Assemblies”
on page 6.
Status Current board status. For more information on board status, see
“Board Test Status” on page 6.
Domain Indicates which domain the board belongs to. For more information
on domains, refer to the “Overview” chapter of the Sun Fire
6800/4810/4800/3800 Systems Platform Administration Manual.
Memory Information
Component Component, such as a board, CPU, or memory DIMM.
J-No Component label on the board.
Size Lists the size of the DIMM.
Reason Describes information why the value is not reported.
Firmware Versions
Component Board.
Device Lists the specific flashPROM on the board.
Type Provides the image type for the device. Describes what the image is
used for. Each device can have multiple types.
Version System controller version number.
Date Date.
Time Time of day.
Clock Status
Component Board.
SSCX Signal Lists the status of the SSC0 or SS1 clock on the board.
Signal Used Defines which clock is used by the board.
Failover Describes if the board will respond to clock failover.