Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 81
setupplatform
Configures the platform specific variables.
Scope
platform shell
Syntax
setupplatform [-p part]...
setupplatform -h
Options/Parameters
-h displays help for this command.
-p part configures the specified part and has the following options:
■ acls is ACLs (Access Control List)
- clears the boards from the ACL
+ adds all boards to the ACL
-a board adds a board
-d board deletes a board
■ loghost configures loghost and facility with the default of local0. The loghost
is the IP address or host name of the syslog loghost. The host name you enter
must be a complete host name (not a partial one ).
■ network is the network settings.
■ partition sets the partition mode.
■ sc configures system controller behavior.
■ snmp is SNMP configuration