Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 55
reboot
Reboots the system controller.
Scope
platform shell
Syntax
reboot [-y|-n]
reboot -h
Options/Parameters
-y does not prompt for confirmation.
-n does not execute this command. Confirmation is requested.
-h displays help for this command.
Description
Reboots the system controller. The reboot command will not change any
configuration settings. Active domains will continue to run.
The keyswitch may be set to off if the system controller reboots while a keyswitch
operations is in progress.
Caution – Rebooting interrupts any current operation. This includes keyswitch
operations, rebooting the Solaris operating environment, testing boards, SNMP, and
so on.