Filter
Top Products
90 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001
showcomponent
Shows the state of a component.
Scope
platform shell, domain shell
Syntax for the Platform Shell
showcomponent [-v] [component] ...
showcomponent [-v] [-d domainID] ...
showcomponent -h
Syntax for the Domain Shell
showcomponent [-v] [component] ...
showcomponent -h
Options/Parameters
-h displays help for this command. Includes component_name syntax.
boardname for CPU/Memory boards is SB0 - SB5 and for I/O assemblies is IB6 - IB9.
-d domainID is a, b, c, or d. Shows components assigned to the domain (platform
only).
Description
Without options, this command shows the state of all components on a board. With
one or more options described in the “Syntax” section, the output shows the state of
one or more components on a board.
Displays the components that have been blacklisted by the disablecomponent
command or components that have been marked as failed when testing using the
testboard command. For CPU/Memory boards, this command provides
information about CPUs, memory modules (DIMMs), and Ecache. This command
displays logical memory bank size.