Filter
Top Products
Chapter 2 System Controller Syntax, Arguments, and Device Names 7
Domain Status
In the showplatform and showdomain commands, one of the fields in the
command output is domain status. The main values of domain status are (
TABLE 2-5):
Not Tested The board has not been tested.
Degraded Certain components on the board have failed or are disabled. A
board is degraded when there are still usable parts on the board.
- The slot is empty or not applicable for this device.
TABLE 2-5 Values for the Domain Status Column in showplatform and showdomain
Command Output
Domain State Description
Powered Off The domain is not active and the keyswitch is in the off position.
Standby The domain is not active and the keyswitch is in the standby
position.
Running POST The domain is active and is running POST (power-on self-test).
Active The domain is active.
Active - OpenBoot
PROM
The domain is active and is running the OpenBoot PROM.
Active - Booting The domain is active and is booting the Solaris operating
environment.
Active - Solaris The domain is active and is running the Solaris operating
environment.
Active - Halted The Solaris operating environment is halted in the domain.
Active - Reset The domain has had an XIR reset and had not be rebooted.
Active - Panicking The domain is active and is panicking. It is creating the core file.
Active - Debugger The domain is active and the debugger is presently running.
Not Responding The domain is not responding.
Paused due to an error The domain is paused due to a hardware error.
TABLE 2-4 Status Field of the showboards Command (Continued)
Test Status Description