Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 31
disconnect
Disconnects the current or specified connection.
Scope
platform shell, domain shell
Syntax for the Platform Shell
disconnect [ID]
disconnect -h
Syntax for the Domain Shell
disconnect [-h]
Options/Parameters
-h displays help for this command.
ID (platform shell only) is the connection to be terminated. ID is the number
displayed under the heading ID for the connections command.
Description
Terminates a connection to the system controller. If this command is used with no
arguments, it disconnects the current session. For illustrations of the disconnect
command, see the chapter “System Controller Navigation Procedures” in the Sun
Fire 6800/4810/4800/3800 Systems Platform Administration Manual.
If the connection was initiated from another system, you will be returned to the
remote host. If the session was initiated from the platform shell, you will see
nothing. To obtain the prompt, press the Return key. If you are connected from the
serial port, then you will return to the main menu.
See Also
connections