Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 95
showdomain
Displays the configuration and status of the domain.
Scope
domain shell
Syntax
showdomain [-v] [-p part]...
showdomain -h
Options/Parameters
-v is verbose mode.
-p part is a parameter for the information to display:
■ acls shows the ACLs (Access Control List)
■ bootparams shows boot parameter information
■ loghosts shows the log hosts
■ mac shows MAC addresses
■ snmp shows SNMP configuration
■ status shows domain status
-h displays help for this command.
Description
Displays the configuration and status of the domain. Some of the information is not
configurable, such as the MAC address and hostID, or is configurable in the
platform, such as the Access Control List (ACL), and SNMP enabled. This command
without any arguments displays all the parameter values configured by the
setupdomain command.
See Also
setupdomain, showdate, setupplatform, showplatform