Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 113
showresetstate
Shows that state of CPUs after a reset or a RED MODE trap.
Scope
domain shell
Syntax
showresetstate [-w | -s | -v]
Options/Parameters
-w displays the contents of register windows. The first windows displayed in the
output are the stack trace for the failing CPU. The windows that are not part of the
stack trace follow in the same order.
-s displays the contents of the secondary save area. Normally, the command
displays the contents of the primary save area that holds the registers from the time
of the first failure. If more than one failure occurs on a CPU, the secondary save area
holds the selected registers from the time of the last failure.
-v displays a summary of all available registers. Includes the registers available
with:
■ -s and -w options
■ Default display (no options)
Description
Prints a summary report of the contents of registers from the save areas of every
CPU in the domain that has a valid saved state. By specifying certain options, the
format and content of the printed report can be controlled.
With no options, the command displays the following registers:
■ Register window (globals, outs, locals, ins) that was current at the time of the
failure.
■ CANSAVE, CANRESTORE, OTHERWIN, and other selected privileged registers.
■ AFAR and AFSR.
■ TICK and some related CPU-specific registers.