Filter
Top Products
Chapter 3 System Controller Alphabetical Command Reference 107
loghost), then the messages will also be logged to the loghost for storage. Note that
storing the messages is only temporary and will not survive a system reboot or a
loss in power.
See Also
setupdomain, setupplatform, showdomain, showplatform
Example
CODE EXAMPLE 3-60 displays the output of the showlogs command, run at the
platform shell after rebooting the system.
CODE EXAMPLE 3-60 Sample Output of the showlogs Command Run After Rebooting the System
schostname:SC> showlogs
May 09 13:36:21 sp4-sc0 Platform.SC: [ID 506094 local0.notice] Boot: ScApp
5.12.5, RTOS 17
May 09 13:36:37 sp4-sc0 Platform.SC: [ID 595276 local0.notice] Clock Source:
75MHz
May 09 13:36:50 sp4-sc0 Platform.SC: [ID 223289 local0.notice] Master System
Controller
May 09 13:38:30 sp4-sc0 Platform.SC: [ID 588369 local0.notice] Starting SNMP
agent.