Filter
Top Products
32 MatrixPRO • 8x8 DVI Router • User’s Guide
4. Operation
Menu System Overview
jÉåì=póëíÉã=lîÉêîáÉï
This section lists the rules and conventions for using the MatrixPRO 8x8 DVI Router’s
menu system. The figure below illustrates a sample menu:
Figure 4-2. Test Pattern Menu (sample)
Please note the following important rules and conventions:
• The top line names the current menu, in all capital letters.
• Subsequent lines typically display two fields:
~ For a listed function, the left-hand field names the function and the right-
hand field is the function’s current parameter or value.
~ For a listed sub-menu, the left-hand field names the sub-menu that you
can access, and the right-hand field displays the double arrow (>>),
indicating that a sub-menu is available.
• The “navigation” cursor (>) in the left-hand column indicates the current line on
which action can be taken. This arrow “scrolls” as you rotate the knob.
• Scrolling:
~ Turn the ADJUST knob counter-clockwise (CCW) to scroll down.
~ Turn the ADJUST knob clockwise (CW) to scroll up.
• To enter a sub-menu, scroll to the desired line and press SEL.
• To change a parameter, scroll to the desired line and press SEL. The cursor
changes to the “edit” cursor (
#). Use the ADJUST knob to modify the parameter.
• To accept a parameter or value, press SEL. The edit cursor changes back to the
navigation cursor.
• In the “edit” mode, to exit (or cancel) without changing the original parameter,
press
ESC.
• To navigate back up the menu structure, press ESC. Each press takes you back
up the menu tree by one level.
TEST PATTERN
> 1400x1050 @59.94
Output All
Type H Ramp
Note
A function listed in brackets (e.g., [N81]) is factory preset and
cannot be adjusted.
Note
Throughout this chapter, the term “select” is used as an
abbreviation for “scroll to a selected menu line and press the
SEL button.”
S Select the Raster Box field to ...