Filter
Top Products
94 MatrixPRO • 8x8 DVI Router • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
MatrixPRO Remote Commands
j~íêáñmol=oÉãçíÉ=`çãã~åÇë
The table below lists MatrixPRO 8x8 DVI Router remote commands.
Table B-2. MatrixPRO 8x8 DVI Router Remote Commands
Command Description Page
CLEAR Clear all matrix video routings 95
DHCP
Enable/disable DHCP mode 95
FPLOCK
en Lock/unlock the front panel from user input 95
GCLEAR
grp Clears grouping information for the specified group 95
GADD grp out in
Add an output and/or input to the selected group 95
GDEL grp out in
Remove output and/or input from the selected group. 96
IP
Set or update IP Address 96
IPINFO
Provides information regarding Ethernet 96
LOADR
Places unit into loader mode for field upgrades 96
MPRC
Remote panel communication, begin command 96
OSTAT
Show output status 96
NSTAT
Send the number of inputs and outputs 97
PRST num
Saves current front panel configuration/routing to a Preset location 97
PSTAT
Displays preset information 97
RESET
Resets the system 97
REV
MatrixPRO board revision and main software version information 97
RGBMUTE
Mutes the output channel, syncs remain 98
RPRST num
Recall an existing preset 98
RTEMP out in
Routes inputs to outputs (pend) 98
SPARAMS
Set serial settings - baud rate 98
TAKE en
Activate or cancel all pending video/audio routes. 98
TPAT
Selects test pattern 99
WHOAREYOU
Query identity of this serial/ethernet connection 99
HELP
Displays a list of available commands 99
?
Display specific command plus parameter description 99