Barco 26-0503000-00 Router User Manual


 
40 MatrixPRO • 8x8 DVI Router • User’s Guide
4. Operation
Using the Main Menu
pí~íìë=jÉåì
From the Main Menu, select Status to display the Status Menu:
Figure 4-11. MatrixPRO Status Menu (sample)
This menu shows all current input-to-output assignments (or “routes”). Any input can be
routed to any combination of the 8 outputs. Please note:
When you first display the Status Menu, the lowest 6 of the 8 input/output
assignments are shown.
Use the ADJUST knob to scroll through the input/output display.
~ Turn the knob clockwise (CW) to scroll the display down the list of
assignments.
~ Turn the knob counter-clockwise (CCW) to scroll the display up the list of
assignments.
The display updates in real time whenever a new route is performed (when the
TAKE button is pressed).
On the menu:
~ Numbers on the lower OUTPUT STATUS line are fixed, and do not
change. These numbers represent the 8 output channels.
~ Numbers on the upper INPUT STATUS line show the input that is routed
to the output listed directly below.
~ The label “T” indicates that a Test Pattern is routed to the selected
output.
~ The label “B” indicates that RGB Mute is enabled for the selected output.
~ The label “-” indicates that the selected output is blanked. This output is
inactive.
INPUT STATUS
-3T- 77
123456
OUTPUT STATUS