Filter
Top Products
46 MatrixPRO • 8x8 DVI Router • User’s Guide
4. Operation
Using the Main Menu
3. Rotate the ADJUST knob and select the desired state (Enabled or Disabled).
4. Press SEL to “accept” the new state, or press ESC to return to the current state
without making changes.
5. To choose a timing source, ensure that the function is enabled. Scroll to the
“Source” line and press SEL to display the edit cursor (#).
6. Rotate the ADJUST knob and select the desired source (Ch. 1 through Ch 8).
7. Press SEL to “accept” the new source, or press ESC to return to the current
source without making changes.
p~îÉ=`çåÑáÖìê~íáçå=jÉåì
From the Main Menu, select Save Preset to display the Save Configuration Menu:
Figure 4-16. MatrixPRO Save Configuration Menu (sample)
The router’s current state (all input and output routes) can be saved to one of eight
configuration files (or “presets”). For example, you can save a configuration in which all
outputs are “blanked,” or a configuration in which a test pattern is routed to all outputs.
Use the following steps to save a router configuration:
1. From the Main Menu, select Save Preset to display the Save Configuration
Menu.
2. Scroll to the “File” line and press SEL to display the edit cursor (#).
3. Rotate the ADJUST knob and select the desired file (1 through 8).
4. Press SEL to save the configuration in the selected file, or press ESC to exit the
function without saving a configuration. When you press SEL, the message
“Saving” appears.
The input/output configuration is now saved, and can be recalled using the “recall”
configuration procedure. Refer to the “Recall Configuration Menu
” section on page
page 47 for details.
SAVE CONFIGURATION
> File 1