Barco 26-0503000-00 Router User Manual


 
MatrixPRO • 8x8 DVI Router • User’s Guide 97
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
MatrixPRO Remote Commands
kpq^q
Description: Number Ins/Outs Status
~ Send the number of inputs and outputs
mopq=åìã
Description: Saves current front panel configuration/routing to a Preset location
Parameters:
out Preset number to save to; [1 - 8]
S Example: PRST 1 (Saves configuration to preset location 1.)
mpq^q
Description: Displays preset information (e.g., preset valid, which input video/
audio # routed, audio level, etc.).
Parameters:
out Preset number; [1 - 8]
S Examples:
PSTAT 1 (Displays preset status for preset 1)
PSTAT (Displays preset status for all presets):
P r e s e t [ 1 ] ; O u t[ 1 ] : A c t iv e 1 , V i d e o 1 , V R o u t e 1 R G B M ut e 0
P r e s e t [ 1 ] ; O u t[ 2 ] : A c t iv e 1 , V i d e o 1 , V R o u t e 1 R G B M ut e 0
•etc.
obpbq
Description: Resets the system
Parameters: RESET [type] <confirm>
[type] specifies type of reset, F=Factory, S=Soft
[confirm] applicable only when reset type is F. Indicates whether
confirmation is desired; 0=No, 1=Yes (default)
S RESET F (Resets system to factory defaults and resets all presets.)
obs==
Description: MatrixPRO board revision and main software version information
Returns:
~ PCB Rev 1.0, Assembly Rev 1.0
~ MatrixPro DVI Software Version
~ Upper Board Fab: B, Assembly: 0
~ Lower Board Fab: B Assembly: 0
Note
This parameter is optional, if no parameter exist, all preset
information (1-8) will be displayed.