Filter
Top Products
54 MatrixPRO • 8x8 DVI Router • User’s Guide
5. GUI Installation and Operation
Control GUI Installation
`çåíêçä=drf=fåëí~ää~íáçå
The MatrixPRO 8x8 DVI Router Control GUI is an interactive Graphical User Interface
application designed to assist users with MatrixPRO operation. The software is only
available via download from either the Barco Folsom website or the FTP server.
The following step-by-step instructions will enable you to install the MatrixPRO Control GUI
in a Windows
®
2000 or XP PC. Use the figures for reference during the procedure.
Use the following steps to install the MatrixPRO control GUI:
1. Verify that your PC meets all hardware and software requirements for running the
GUI. These are identical to the requirements for downloading software. In
Chapter 6, refer to the “Hardware Requirements
” section on page 78 and the
“Software Requirements” section on page 78 for details.
2. Download the MatrixPRO software. In Chapter 6, refer to the “Downloading
Software” section on page 79 for instructions.
3. With the download complete, navigate to the target folder and double-click the
EXE to launch the installation shield.
4. Follow the prompts to install the upgrade package in the default folder. At the
conclusion of the procedure, a new path will be created under Start > Programs >
Barco Folsom.
Note
The MatrixPRO Control GUI software is included within the
“System Software” download.
Note
This procedure will not be required if you have already
downloaded system software — for purposes of upgrading
the MatrixPRO’s code. In this case, the GUI is automatically
installed when you run the System Software executable.