Filter
Top Products
1-3
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02
Chapter 1 Introducing the Cisco Application Deployment Engine 2130 and 2140 Series Appliance
Product Overview
• One optional DVD-ROM drive (located on the front panel)
• Two RJ-45 serial (console) ports (one located on the front panel and one located on the rear panel)
• Single or redundant (optional) AC or DC power supply
• Front-to-rear airflow blowers using two 40 x 40 x 56-mm exhaust fans and ducting for the CPU and
memory, and two 40-mm exhaust fans built in to the power supply
• Expansion slot support (located on the rear panel):
–
Two PCIe, low profile
–
Three PCI-X full height
• Three USB 2.0 ports (one located on the front panel, USB 2; two located on the rear panel, USB 0
and USB 1)
• One PS/2 (keyboard) port (located on the rear panel)
1
• One PS/2 (mouse) port (located on the rear panel)
1
• One DB-15 serial (video) port (located on the rear panel)
• Rear access cabling
• Five front-panel appliance LEDs (for a description, see the “Cisco ADE 2130 and 2140 Series
Appliance Front View” section on page 1-6):
–
NIC activity (indicates whether interrupts or packet transfers are running)
–
Power (indicates whether the power supply is operational)
–
Hard disk drive activity (indicates whether the drive is functioning properly)
–
Appliance status
–
Appliance identification
• The Cisco ADE 2130 and 2140 Series appliance is normally shipped with:
–
Rack-mount kit including either brackets or rails allowing the Cisco ADE 2130 and 2140 Series
appliance to be positioned in a 2- or 4-post equipment rack. (See Chapter 3, “Installing the
Cisco ADE 2130 and 2140 Series Appliance.”)
Product Serial Number Location
On the Cisco ADE 2130 and 2140 Series appliance, the serial number label is located on the right-hand
corner above the RJ-45 serial (console) connector on the front of the appliance. (See Figure 1-2 on
page 1-4.)
1. Either PS/2 port can support the mouse or keyboard. Neither port supports hot-plugging.