Filter
Top Products
3-5
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02
Chapter 3 Installing the Cisco ADE 2130 and 2140 Series Appliance
Mounting the Cisco ADE 2130 and 2140 Series Appliance in a 2-Post Rack
Mid-Mounting in a 2-Post Rack
This section contains the following topics:
• Attaching the L Brackets to the Appliance, page 3-5
• Installing the Appliance in the Rack, page 3-6
Attaching the L Brackets to the Appliance
To attach the brackets to the appliance:
Step 1 Place an L bracket (see Figure 3-2) along one side of the appliance in the mid-mount position (holes 4,
5, and 6 on the appliance).
Figure 3-2 Attaching the L Bracket
Step 2 Insert the hex head screws (see Figure 3-2) and fasten the L bracket to the appliance using a Number 2
Phillips screwdriver.
Step 3 Repeat Steps 1 and 2 for the other L bracket.
Step 4 You are now ready to install the appliance into the 2-post rack.
Proceed to the next section, “Installing the Appliance in the Rack,” to continue the installation.
231948
Cisco
RTC Security Appliance