Filter
Top Products
2-17
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02
Chapter 2 Preparing to Install the Cisco ADE 2130 and 2140 Series Appliance
Ethernet and Console Port Considerations
To connect a PC running terminal-emulation software to the console port, use an RJ-45-to-RJ-45 rollover
cable and an RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL). (For more information, see the
“Serial (Console) Port” section on page 1-12.)
The default parameters for the console port are 9600 baud, 8 data bits, no parity, 1 stop bit, and no
hardware flow control.