Filter
Top Products
CHAPTER
3-1
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02
3
Installing the Cisco ADE 2130 and 2140 Series
Appliance
This chapter describes how to install your Cisco ADE 2130 and 2140 Series appliance and how to
connect it to the network.
This chapter contains the following sections:
• Rack-Mounting Configuration Guidelines, page 3-2
• Mounting the Cisco ADE 2130 and 2140 Series Appliance in a 2-Post Rack, page 3-3
• Mounting the Cisco ADE 2130 and 2140 Series Appliance in a 4-Post Rack, page 3-7
• Cisco ADE 2130 and 2140 Series Appliance Power, page 3-11
• Connecting the Network and Console Cables, page 3-18
• Powering Up the Cisco ADE 2130 and 2140 Series Appliance, page 3-20
• Removing or Replacing the Cisco ADE 2130 and 2140 Series Appliance, page 3-22
Before you begin the installation, read the Regulatory Compliance and Safety Information for the Cisco
Application Deployment Engine (ADE) 2130 and 2140 Series Appliance document and the Site
Preparation and Safety Guide that shipped with your appliance.
Warning
Read the installation instructions before you connect the system to its power source.
Statement 10
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
This equipment contains an energy hazard. Disconnect the system before servicing.
Statement 186
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1