Filter
Top Products
SPI9000 Inverter Unit FI9 – FI14 User Manual
MN04004002E
For more information visit: www.EatonElectrical.com 5-5
September 2006
Menu Navigation
The data on the control keypad is arranged in menus and submenus. The menus are used for
the display and editing of measurement and control signals, parameter settings and
reference value and fault displays. Through the menus, you can also adjust the contrast of
the display.
Figure 5-3: Keypad Display Data
The first menu level consists of menus M1 to M7 and is called the Main menu. The user can
navigate in the main menu with the Browser buttons up and down. The desired submenu can
be entered from the main menu with the menu buttons. When there still are pages to enter
under the currently displayed menu or page, you can see an arrow in the lower right corner
of the display and can reach the next menu level by pressing Menu Button Right.
The control keypad navigation chart is shown in Figure 5-4. Please note that menu M1 is
located in the lower left corner. From there you will be able to navigate your way up to the
desired menu using the menu and browser buttons.
You will find more detailed descriptions of the menus later in this chapter.
Monitor
V1 V14
Location
Description
Number of Items
Available